Relatively speaking, the classification of the mold temperature machine is not as much as the classification of the chiller , and there are two types of high temperature mold temperature machine and rapid cooling speed hot mold temperature machine. The common advantages and characteristics of the high temperature mold temperature machine and the rapid cooling speed hot mold temperature machine are as follows:
First of all, the advantages of the high temperature mold temperature machine and the rapid cooling speed hot mold temperature machine are to eliminate the melting lines, melting marks, ripples, silver threads, etc. on the surface of the product. Completely solve the phenomenon of surface shrinkage of plastic products. To improve the surface finish of the product, the surface finish can reach the mirror surface. The product does not need to be spray-painted for subsequent processing, which improves the yield of 21-31%. The solution to the fiber floating phenomenon caused by fiber-reinforced products is to make the quality more perfect, to make thin-wall molding to improve injection fluidity, and to improve product quality and strength. The thick-wall molding injection cycle can be reduced by more than 62%.
Among them, the characteristics of the high temperature mold temperature machine include six aspects, namely: 1. Microcomputer control mode or button type; 2. Automatic exhaust function at startup;
3. Mold return oil and pump return function (optional); 4. Omron OMRON, Fuji Electric FUJI, Schneider TE control parts; 5. Stainless steel integrated molding, small tube damage, uniform heating; 6, pump horsepower and heater energy Can be customized
The quick cooling and hot (high light) mold temperature machine also has the following characteristics: 7-inch liquid crystal true color LCD display (optional), touch Chinese number input, full Chinese interface, easy operation. The full closed-loop system controls the detection of input and output temperature, and the actual temperature of the mold is fed back to the PLC. The digital color chart is displayed to ensure that the output is accurate and stable. High temperature steam, cold water, air temperature and pressure are six alarms, which interlock with the injection molding machine signal with time and action. Single and dual mold temperature detection (optional), input and output pipelines are made of stainless steel, multiple sets of input and output interfaces.
Of course, there are some differences between the high temperature mold temperature machine and the rapid cooling speed hot mold temperature machine, and the specific details can be concerned about the relevant knowledge module of Guansheng Machinery Company http://ylscps.com !
Scan on WeChat