In some of the previous knowledge articles, there are more chiller
, screw chiller, mold temperature machine, etc., but the knowledge section about the rubber cutting machine is relatively small, so this article is mainly for you to introduce in detail Some details of the rubber cutting machine, and the main function of the rubber cutting machine is convenient for the next process of plasticizing and cutting the rubber block (chip) equipment.
Among them, the glue cutting machine is mainly divided into two types: a vertical glue cutting machine and a horizontal glue cutting machine. The cutter can be driven by hydraulic pressure, wind pressure or electric power, and there are single and multiple cutters.
Horizontal hydraulic glue cutting machine, equipped with star-shaped ten-blade cutter, can cut the unheated rubber block into ten wedge-shaped small pieces with oil pressure, and then send it into the continuous heating chamber through the knife gap to heat it for plastic. For refining. Safe operation, high output, and create conditions for the automation and continuity of production processes.
In addition, there are motor-driven and air-driven vertical glue cutters, and styrene-butadiene rubber glue cutters that cut the film into thin strips in advance for thermoplastic molding. The main parts of the glue cutting machine are composed of a working cylinder, a base, a glue cutting knife, a frame, an auxiliary workbench, a hydraulic system, and an electrical system. The base under the glue cutting knife is equipped with a nylon pad to protect the blade of the glue cutting knife. . When cutting raw rubber, manually place the rubber under the rubber cutting knife, and then press the start button, the rubber cutting knife is driven by the piston rod along the slide on the rack to cut the rubber. The frame is equipped with two upper and lower limit switches to control the directional valve to change the movement direction of the cutting knife, and at the same time, it can also protect the piston cylinder head.
Of course, the above content only introduces some basic common knowledge of the rubber cutting machine, and it is also one of the necessary common knowledge that must be mastered. Mastering these basic common knowledge is the premise to understand more relevant knowledge. The machine is also deeply supported and loved by customers for its excellent quality!