Dongguan Guanguansheng Machinery Co., Ltd., in addition to being very prominent in chiller and screw chiller units , is also among the best in cooling towers, and cooling towers are generally divided into four models including ordinary models (cooling temperature difference 5.1- 7.2'C), industrial type (cooling temperature difference is 10.1-30.2'C), high temperature type (temperature difference temperature will generally be higher than 60.3'C), high temperature industrial type four. The cooling tower is made of glass fiber reinforced plastic, which is light in weight, convenient to transport, energy-saving and water-saving, and has low noise. It is widely welcomed by customers. When choosing a cooling tower, you must first pay attention to the amount of flow you need, the temperature of the inlet and outlet water, the working environment where the cooling tower is located, etc., and it is the most practical to choose a suitable cooling tower.
The four items of attention for maintaining the cooling tower also include four aspects. The first aspect is the electrical aspect, mainly the maintenance of the motor and the wiring of the secondary circuit. There is basically little workload. The second aspect is the mechanical reducer device. The normal oil level can be changed regularly, such as three or six months. In the third aspect, the blade angle adjustment is generally not adjusted. After installation according to the instructions, adjust the blade to see whether the current is too high or not, and the amount of air volume. The blades are rarely broken, and generally only run for a period of time when the initial installation angle is wrong, and other maintenance tasks are rare. The biggest problem is that the fan is loud and the vibration is large. If the blade is not operated for a long time, it may cause moss to cause unbalanced vibration!
The above is a brief introduction to the cooling temperature difference range of the four models of the cooling tower. Of course, the temperature mentioned above may have a small temperature difference in the actual process, but the fluctuation is not large. At the same time, the maintenance of the cooling tower is also introduced. Four aspects that should be noticed, only maintenance and correct operation can greatly extend the service life of the machine!
Scan on WeChat